Spindles VS bumpsteer kit studs
94 Mustang spindles
 |
Right side spindle with right side
stud. Notice the lack of threads.
Spindle boss thickness is .755. Boss hole diameter is .530 |
 |
Left spindle with right side stud
inserted. Notice that it also does not have enough threads
showing. but closer.
Spindle boss thickness is .755. Boss hole diameter is .525 |
 |
Left side spindle with left side stud.
Fits but close.
Notice the gap at the bottom of the spindle boss. This gap also was present in the other configurations. Not really a problem though as the taper does the work. |
The solution is to use a 12 mm washer under the top nut. Bevel slightly one side of the inner OD to ensure clearance.
All the photos in a zip file. Unedited and edited photos