ASSORTED BRAKE LINE & ADAPTER DATA
Pre-flared brake line components form NAPA:
Passenger Front:
(2) 7/16"-24 double flare (DF) to 3/8"-24 DF adapter -- NAPA/Edelmann 7818
(1) 72" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24)
Driver Front:
(1) 7/16"-24 DF to 3/8"-24 DF adapter -- NAPA/Edelmann 7818
(1) 10mm-1 BUBBLE flare to 3/8"-24 DF adapter -- Edelmann 271300
(1) 20" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24)
Rear:
(1) std 3/16" brake line coupler -- NAPA/Edelmann 302X3
(1) 40" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24)
(1) 72" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24)
Courtney, Chad - "I'm now putting in the brake lines, I spent some frustrating time trying to double flare the lines with a double flaring tool borrowed from Autozone's rent a tools program. Do yourself a favor and don't bother with it. Go to Napa and spend about $25 on pre-flared 3/16" lines w/ 3/8-24 connectors, and some adapters and you'll be a much happier person. Here's what you need depending on your setup. Also, I'd suggest using the tried and true method to get accurate line bends by using a wire coat hanger and bend it where you need and then use it as a model so you're not trying to bend the lines inside the frame itself where you can't get a good tubing bender.
|
Live Axle |
IRS |
IRS w/ Earl's Braided Line Kit |
|
Passenger Front |
Passenger Front |
Passenger Front |
|
(2) 7/16"-24 double flare (DF) to 3/8"-24 DF adapter -- NAPA/Edelmann 7818 |
(2) 7/16"-24 double flare (DF) to 3/8"-24 DF adapter -- NAPA/Edelmann 7818 |
(2) 7/16"-24 double flare (DF) to 3/8"-24 DF adapter -- NAPA/Edelmann 7818 |
|
(1) 72" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24) |
(1) 72" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24) |
(1) 72" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24) |
|
Driver Front |
Driver Front |
Driver Front |
|
(1) 7/16"-24 DF to 3/8"-24 DF adapter -- NAPA/Edelmann 7818 |
(1) 7/16"-24 DF to 3/8"-24 DF adapter -- NAPA/Edelmann 7818 |
(1) 7/16"-24 DF to 3/8"-24 DF adapter -- NAPA/Edelmann 7818 |
|
(1) 10mm-1 BUBBLE flare to 3/8"-24 DF adapter -- Edelmann 271300 |
(1) 10mm-1 BUBBLE flare to 3/8"-24 DF adapter -- Edelmann 271300 |
(1) 10mm-1 BUBBLE flare to 3/8"-24 DF adapter -- Edelmann 271300 |
|
(1) 20" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24) |
(1) 20" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24) |
(1) 20" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24) |
|
Rear |
Rear |
Rear |
|
(1) std 3/16" brake line coupler -- NAPA/Edelmann 302x3 |
(1) 40" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24) |
(1) std 3/16" brake line coupler -- NAPA/Edelmann 302x3 |
|
(1) 40" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24) |
(1) 60" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24) |
(1) 40" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24) |
|
(1) 72" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24) |
(1) 50" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24) |
(2) 60" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24) |
|
|
60"+40" to Driver side block, 50" to passenger side |
(1) 30" preflared 3/16" line w/ std 3/16" DF fittings (3/8"-24) |
|
Hydraulic Brake Fittings Cross Reference - Visit www.Slant.com for more info.Commonly used fitting for FFR builds are in BLUE. |
|
Hydraulic Brake Fitting adapters can be used to adapt standard brake lines to the different size ports used in dual master cylinders. The tube O.D. is the outside diameter of the brake line. Edelmann Hydraulic Brake Fittings are zinc plated to help prevent galvanic corrosion. Adapters are also supplied to adapt standard brake lines to metric sizing for import and some late model domestic vehicles. ADAPTER STANDARD TO DUAL MASTER CYLINDER |
|
Edelmann # |
Everco # |
Weatherhead # |
Female Inverted Flare Seat |
Male Inverted Flare Tube |
|
258302 |
7830 |
7911 |
3/16" (3/8-24 thread) |
3/16" (9/16-18 thread) |
|
258303 |
7831 |
7910 |
3/16" (3/8-24 thread) |
3/16" (9/16-20 thread) |
|
258306 |
7912 |
3/16" (9/16-18 thread) |
3/16" (1/2-20 thread) |
|
|
258307 |
7845 |
7913 |
3/16" (1/2-20 thread) |
3/16" (9/16-18 thread) |
|
258340 |
7818 |
7818 |
3/16" |
1/4" |
|
258350 |
7819 |
7909 |
3/16" |
5/16" |
|
258403 |
7833 |
7908 |
1/4" |
3/16" (9/16-18 thread) |
|
258430 |
158 |
7828 |
1/4" |
3/16" |
|
258450 |
7832 |
7829 |
1/4" |
5/16" |
|
258540 |
805D |
7917 |
5/16" |
1/4" |
|
258560 |
7834 |
7916 |
5/16" |
3/8" |
|
258650 |
7840 |
7915 |
3/8" |
5/16" (1/2-20 thread) |
|
Edelmann # |
Everco # |
Weatherhead # |
Female Inverted Flare Seat |
Male Bubble Flare |
|
263000 |
3029 |
7972 |
3/16" (3/8-24 thread) |
13-1.5MM |
|
264000 |
3030 |
7973 |
3/16" (3/8-24 thread) |
11-1.5MM |
|
265000 |
3014 |
7974 |
3/16" (3/8-24 thread) |
12-1.0MM |
Converts 3/16" Standard Line to Metric Bubble.
ADAPTER STANDARD TO STRAIGHT THREAD
|
Edelmann # |
Everco # |
Weatherhead # |
Brake Line Size |
Male Bubble Flare |
|
265301 |
7817 |
7817 |
3/16" |
1/2"-20 |
|
265400 |
7732 |
7732 |
1/4" |
7/16"-20 |
|
265401 |
7727 |
7727 |
1/4" |
1/2"-20 |
|
265500 |
1074 |
1074 |
5/16" |
1/2"-20 |
These fittings are used to adapt Edelmann brake lines to straight thread. Nuts seat on hex face.
ADAPTER METRIC TO METRIC BUBBLE
|
Edelmann # |
Everco # |
Weatherhead # |
Female Bubble Flare |
Metric Bubble Flare |
|
266000 |
3021B |
7935 |
3/16" (10-1.0MM thread) |
11-1.5MM |
|
267000 |
3022B |
7936 |
3/16" (10-1.0MM thread) |
12-1.0MM |
|
268000 |
3023B |
7937 |
3/16" (10-1.0MM thread) |
13-1.5MM |
Converts Edelmann 3/16" (10-1.0MM) metric thread bubble flare brake line to 11-1.5MM, 12-1.5MM or 13-1.5MM male thread. Used at Master Cylinder on many General Motors vehicles from 1980.
ADAPTER STANDARD TO METRIC STANDARD
|
Edelmann # |
Everco # |
Weatherhead # |
Female Inverted Flare Seat |
Male Inverted Flare Tube |
|
270300 |
3025B |
1443 |
3/16" (3/8-24 thread) |
4.762 (3/16") (10.0MM Thread) |
Adapts Edelmann 3/16" brake lines to most Japanese vehicles (Colt, Datsun, LUV, Mazda, Toyota).
ADAPTER STANDARD TO METRIC STANDARD
|
Edelmann # |
Everco # |
Weatherhead # |
Female Inverted Flare Seat |
Male Inverted Flare Tube |
|
270330 |
3028B |
7976 |
3/16" (3/8-24 thread) |
4.762 (3/16") (10-1.25MM Thread) |
Used on many Japanese vehicles when converting Edelmann 3/16" (3/8-24 brake lines to 3/16" (10-1.25MM) metric thread inverted flare.
ADAPTER STANDARD TO METRIC BUBBLE
|
Edelmann # |
Everco # |
Weatherhead # |
Female Inverted Flare Seat |
Male Inverted Flare Tube |
|
271300 |
3024B |
1442 |
3/16" (3/8-24 thread) |
4.762 (3/16") (10.0MM Thread) |
Adapts Edelmann 3/16" brake lines to most German and some French cars.
ADAPTER STANDARD TO METRIC BUBBLE
|
Edelmann # |
Everco # |
Weatherhead # |
Female Standard Flare Tube |
Male Bubble Flare Tube |
|
271330 |
3026B |
7970 |
3/16" (3/8-24 thread) |
4.762 (3/16") (10-1.25MM thread) |
Used on Fiat applications when converting 3/16" (3/8-24) inverted flare brake lines to 3/16" (10-1.25MM) metric thread bubble flare.
ADAPTER STANDARD TO BUBBLE FLARE
|
Edelmann # |
Everco # |
Weatherhead # |
Female Inverted Flare Seat |
Male Bubble Flare Tube |
|
272330 |
3009B |
1441 |
3/16" (3/8-24 thread) |
3/16" (3/8-24 thread) |
Adapts Edelmann 3/16" brake lines to most English and Fiat cars.
ADAPTER STANDARD TO BUBBLE FLARE
|
Edelmann # |
Everco # |
Weatherhead # |
Female Inverted Flare Seat |
Male Bubble Flare Tube |
|
272340 |
3027B |
7971 |
3/16" (3/8-24 thread) |
1/4" (7/16-20 thread) |
Used on British vehicles when converting Edelmann 3/16" (3/8-24) standard thread inverted flare brake lines to 1/4" (7/16-20) standard thread bubble flare.