Steering Rack Limiters (C-clips)

Part number N804842-S, "Washer, AX 26". two white polyeurethane "C" clips, that go on the linkage before the tie-rod ends. Used to limit the steering from turning too far into the car, hitting the lower control arms.

Jack up front end and support on stands. turn steering right all the way.
on the right side of the rack, remove the clips holding the boot on the end of the rack.
slide boot away from the rack.
You will see the inner "ball" and "socket" of the inner tire rod end, and the "teeth" of the rack.
snap the "c" clips on the inside of the ball/socket, on the shaft of the rack.
reassemble
turn steering all the way left.
repeat
lower car